Mon – Fri 8:30–17:00


All technological operations in the manufacture of products are subject to the requirements of antistat,

personnel grounding; air ionization; anti-static furniture, packaging, packaging, clothing, shoes.

assembly steps

Wire Harness Insulating Kembrik
(Wire Harvesting. Tinning)
  • Applying a thin layer of molten tin to the surface of metal (primarily steel and iron) products. Tinning is done to protect the metal from corrosion or to prepare for soldering (the tinned surface is better wetted by solder).
Wire Harness Insulating Kembrik
Automatic wire trimming and stripping JL-330F-1
(Automatic trimming and stripping wires JL-330F-1)
  • Installation of automatic cutting and stripping wires JL-330F-1 is a multifunctional device that allows cutting and stripping wires, cutting insulating cambric.
  • A feature of this installation is the ability to work with stranded flat wire.
  • Installation JL-330F-1 prepares the wires, equipping them with a standard contact, so that the cables are mounted in a general technological scheme much faster and better.
  • The installation is equipped with high-precision automatic control systems.
  • Due to its compactness, the unit can be installed even in small premises.
Item Type:
Wire stripping machine
Blade Type:
V-shaped knife
Power supply:
AC220V 50/60 Hz
Cutting length:
Stripping Length:
Cutting tolerance:
Applicable wire diameter:
AWG16 # -30 #
Wire Processing Number:
single / double
LED strip mounting
(Manual soldering of wires to LED strips)
  • Soldering is the recommended method because it provides a more reliable and secure connection..
LED strip mounting
Installation of automatic soldering BT-900H-2T
(Installation of automatic soldering BT-900H-2T)
  • The advantages of the installation design allow you to optimize the automatic soldering for each type and size of the LED product.
  • The basis of the design consists of two coordinate tables, a coordinate control device for soldering irons, moving in XZ planes and two soldering stations with solder feeders.
  • To control the installation, the welder’s 4D2Y control system is used, which contains 2 adjustment axes.
  • High accuracy, speed and durability.
  • Compatible with all sizes of flexible printed circuit boards.
Work zone :
900×100 mm (XYZ)
Work load:
Speed control XY:
max. 1000 mm / s, Z: max. 500 mm / s
Heating method:
150 W high frequency intelligent temperature controller
Solder temperature:
200 ~ 600oC
Tin Feed Range:
wire diameter & Oslash; 0.4 & Oslash; 1.5 mm
Rupture and sticking double sided tape
Rupture and sticking double sided tape
Operation control
  • Check the performance of the finished LED strip when applying to them the supply voltage, simulating the work.
Operation control
Antistatic packaging
  • Antistazashchita protects from static charge, moisture, mechanical damage. It is very important that packaging materials, firstly, do not generate a static field that causes damage from a static discharge, and secondly, provide effective protection against external fields during transport and storage outside the antistatic zone.
Антистатическая упаковка
PrinterTSC TA310
Printing Label Stickers
(Printer TSC TA310)
  • Enhanced print quality of 300 dpi at a speed of 102 mm / s makes it possible to print about 4,000 labels per shift.
  • High printer performance combined with low cost makes the TSC TA310 truly indispensable in the enterprise.
  • Powerful processor without losing speed.
  • The presence of two separate engines helps to keep track of the ribbon with labels and roll of ribbon, and also saves the life of the printing elements.
Recommended print volume per shift:
up to 4000 labels
Print speed:
102 mm / s
Type of printing:
thermal transfer printing and direct thermal printing
Print resolution:
300 dpi (12 points per mm)
Max. print width:
104 mm
Max. print length:
1016 mm
Min. label length:
10 mm
Max. Label Roll Diameter:
127 mm; 214 mm when using the external holder
Max. ribbon roll length:
300 m (winding OUT)
Diam ribbon roll sleeves:
25,4 mm (1 inch)
4 MB FLASH; 8 MB SDRAM; SD card support (up to 4 GB)
32-bit RISC CPU
USB 2.0
224 × 186 × 294 mm
2,45 kg
  • The originality of the TSC TA310 model also consists in the fact that the block of the printing mechanism can be used separately from the printer, this is possible due to its autonomy. The program allows you to create labels of the size you need, place text, graphic information on them, as well as barcodes of all common formats: Code 39, Code 93, Code 128UCC, Code 128 subsets A, B, C, Codabar, Interleaved 2 of 5, EAN-8, EAN-13, EAN-128, UPC-A, UPC-E, EAN and UPC 2 (5) digits add-on, MSI, PLESSEY, POSTNET, China POST, GS1 DataBar, Code 11, PDF-417 , Maxicode, DataMatrix, QR code, Aztec, GS1 DataBar Composite Code. The drivers that come with the kit are Russified and compatible with all versions of Windows OS, as well as popular Linux OS builds.